Horizon

Conveyor Spares

Conveyor Units

Conveyor Drum Rollers

Overview

These large diameter thick walled conveyor drum rollers are designed mainly for use on Belt Conveyors as either drive or idler drums.

Specification

Tube Size Spindle Option
114.3mm x 6.3mm ø25mm, ø30mm, ø1 1/4″, ø35mm, ø38mm & ø40mm
168.33mm x 8mm ø25mm, ø30mm, ø1 1/4″, ø35mm, ø38mm & ø40mm
219.1mm x 8.8mm ø25mm, ø30mm, ø1 1/4″, ø35mm, ø38mm & ø40mm

A wide range of machined shaft ends are available.

Special tube diameters available upon request.

The outside diameter can be machined parallel or crowned to aid belt tracking.

Supplied with either fully sealed cartridge bearings or with seam welded end plates and shafts.

Finish: Rollers are supplied self colour as standard.

Spindle Conditions

Round

Round

Un-machined round spindles are suitable for double spring loaded rollers. In some cases the sideframes could be drilled as opposed to punched.

Hexagonal

Hexagonal

Extruded hexagonal spindles are suitable for punched conveyor sideframes. In most cases the spindle would be spring loaded. The hexagonal shape prevents the spindle from rotating in the side frame, it also prevents the bearing inner race from rotating on the spindle.

Drilled and Tapped

Drilled and Tapped

Both round and hexagonal spindles can be drilled and tapped at each end to enable the roller to be bolted between the conveyor sideframes, thus increasing the rigidity of the conveyor.

Milled Flats

Milled Flats

Round spindles with 2 milled flats are used in conveyors with slotted side frames where rollers are lowered into position. In most cases the spindle is supplied fixed within the roller.

Circlipped

Circlipped

External circlips can be used to captivate a spindle within a roller. This method of retention is usually found on heavy duty rollers and drums.

Threaded

Threaded

Round spindles can be threaded at either end to suit a metric or imperial nut. In most cases the spindle is supplied loose.

Drilled Spindle End

Drilled Spindle End

'Cross drilled' spindles are supplied loose and allow several rollers to be wired together in a sideframe to prevent spindle rotation and to retain the roller.

Conveyor Rollers Range

Added to wishlist!

Submit Enquiry Now